Cleaning Business Profit Margins, Expenses, and Cash Flow
Why a profitable cleaning company can still miss payroll

In this article
- Revenue, profit and cash are three numbers
- What margin means, and why we will not give you a benchmark
- Where the money goes
- Payroll is a calendar
- Receivables: the balance customers owe you
- Reserves and the two-payroll rule
- Contract profitability and concentration
- Growth consumes cash before it adds any
- The 13-week cash-flow worksheet
- A monthly review that takes an hour
- Where help can come from
- What to do this week
- Sources
Picture a cleaning company with seven commercial accounts and $17,000 a month in billings. It opens a thirteen-week stretch with $6,000 in the bank. Over those weeks it sends out $51,000 in invoices, pays every cleaner on time, covers insurance, rent and software, and pays the owner $4,500. On paper it ends the quarter $6,870 ahead after paying its owner. In the bank it is $870 ahead, and in week 8 the balance falls to $3,290, just after a payroll run of $5,682.50 left the account.
That company is invented for this article, and every figure about it is an assumption we chose and then checked with a script. The gap between $6,870 and $870 is the subject here. A cleaning business pays its crews every week or two, while commercial customers often pay on terms of 30 days or longer, so a company can earn a profit and still be short of cash on the Friday payroll is due. This guide explains the margins and expenses that determine profit, the payroll and receivable timing that determines cash, and a 13-week worksheet for seeing the difference before it arrives. It builds on the break-even and cash-gap examples in our guide to starting a cleaning business and does not repeat them.
Dollar figures in the worked examples are hypothetical. Payroll tax rules come from the IRS and vary by state and by employer; none of this is tax, legal or accounting advice, and a CPA or bookkeeper should set up your own records and filings.
Revenue, profit and cash are three numbers
The invented company above produces three different results from the same thirteen weeks.
| Measure | What it counts | Sample result |
|---|---|---|
| Billed | Invoices issued in the 13 weeks | $51,000 |
| Profit after paying the owner | Billed, minus the costs paid in the window, minus owner draws | $6,870 |
| Cash added | Money that actually arrived, minus money that left | $870 |
The $6,000 difference between the last two lines is the growth in what customers owe the company. At the start of week 1 the company was owed $26,500 on invoices already sent. By the end of week 13 it was owed $32,500. Six thousand dollars of profit was sitting in other people's accounts payable departments, while the company's own bills were being paid from its bank balance.
Accountants describe this with two methods. Under the cash method, the IRS says in Publication 583, you report income in the year you receive it, and under the accrual method you generally report income when you earn it, even though you may receive payment in a later year (IRS). The SBA's finance guidance makes a similar point in plain language: accrual accounting records a sale when it is completed, while the cash method records it once payment arrives, and the cash method shows cash flow clearly but has limited predictive value (SBA). Which method your company may use for taxes is a question for your CPA. Either way, you need to know, week by week, what is in the bank and what is coming.
What margin means, and why we will not give you a benchmark
Owners want to know what margin is "normal" for a cleaning business, and the honest answer is that we did not find an authoritative one. No independent, measured profit-margin or employee-turnover figure for U.S. commercial cleaning turned up in the sources we could read for this article. The industry association's own market studies and benchmarking reports were behind access we did not have, so we are not guessing at what they say. Rather than pick a number, here is what we can attribute and how much weight it deserves.
The Building Service Contractors Association International (BSCAI) says typical margins in commercial cleaning "can vary anywhere from 8% to 30%," a range it gives in an article about pricing bids (BSCAI, March 12, 2025). A different BSCAI article, written by the chief executive of a cleaning franchisor, says net profit margins "typically hover around 6% to 12% for large commercial janitorial contracts" (BSCAI, July 7, 2026). The same article cites annual turnover of 75 to 200 percent, with no source given. These two ranges overlap but are not the same measure (typical margins in an article about pricing bids, and a net margin for large contracts), and neither is a measured average of a population of companies. Treat them as practitioners' estimates. They tell you that thin margins are common, not what yours should be.
A margin quoted without a definition is not usable, because the same company has three margins. Gross margin subtracts the direct costs of the work: wages, payroll taxes, workers' compensation, supplies, vehicles. Margin after overhead also subtracts costs that exist whether or not a given account does, such as insurance, rent and software. Margin after owner pay subtracts what the owner draws. Using the invented company's thirteen weeks:
| Margin | Calculation | Result |
|---|---|---|
| Gross | ($51,000 − $36,840) ÷ $51,000 = $14,160 ÷ $51,000 | 27.8% |
| After overhead | ($14,160 − $2,790) ÷ $51,000 = $11,370 ÷ $51,000 | 22.3% |
| After owner pay | ($11,370 − $4,500) ÷ $51,000 = $6,870 ÷ $51,000 | 13.5% |
The $36,840 of direct cost is net pay of $25,305, payroll tax deposits of $6,990, workers' compensation of $1,800, unemployment tax of $600, supplies of $1,235 and vehicles of $910. The $2,790 of overhead is insurance of $630, rent of $1,200 and software of $960. The 13.5 percent describes only this made-up company. A real company should compute its own three margins from its own books. If you want the pricing side, including the difference between margin and markup, the flagship guide covers it and our pricing guide goes further.
Where the money goes
For a cleaning company the largest cost is people. BSCAI describes labor as roughly 50 to 80 percent of the total price of a commercial bid (BSCAI), and the unit-economics article uses the same range. In the invented company, net pay, payroll taxes, unemployment tax and workers' compensation total $34,695, or 68.0 percent of the $51,000 billed, which sits inside that range.
"Labor" hides a second layer, the employer's cost on top of wages, often called labor burden. BSCAI lists mandatory payroll costs as payroll taxes, workers' compensation and general liability insurance, and separately lists optional benefits such as health insurance, retirement plans and paid time off. It gives no percentage. You can build the statutory part from regulators' numbers instead of guessing, with the caveat that two of the inputs below are assumptions that differ by state and employer.
That is 14.5 percent of wages, or $2.62 per hour ($3,927.50 ÷ 1,500), for a loaded rate of about $20.62 an hour. It excludes paid time off, health benefits, recruiting, background checks and training time, all of which can push the true figure higher, and the starting guide used a 20 percent assumption that allowed for some of them. The point of building the number is that you can replace each assumption with a quote, which a rule of thumb does not let you do. The hiring and retention guide covers the people side of the same costs.
Payroll is a calendar
A percentage tells you what payroll costs. A calendar tells you when you have to find the money, and the calendar is less forgiving.
Take one payroll in the invented company: $5,000 of gross wages every second week. Employees receive their pay net of withholding, so we assume 8 percent income-tax withholding (it depends on each employee's Form W-4) and the employee's 7.65 percent share of Social Security and Medicare. Net pay is $5,000 × (1 − 0.0765 − 0.08) = $4,217.50. The company also owes the Treasury the withheld income tax ($400.00), the employee's FICA ($382.50) and its own matching FICA ($382.50), a deposit of $1,165.00. Workers' compensation at an assumed 6 percent adds $300.00. One payroll therefore takes $5,682.50 out of the bank, about 14 percent more than the $5,000 on the timesheets.
The IRS says employment tax deposits must be made by electronic funds transfer, through a business tax account, IRS Direct Pay for businesses or the Electronic Federal Tax Payment System (IRS, page reviewed June 29, 2026). Publication 15 sets two deposit schedules. An employer whose total taxes reported on Form 941 in the lookback period were $50,000 or less is a monthly depositor, who deposits taxes on payments made during a month by the 15th day of the following month. Over $50,000 makes an employer a semiweekly depositor, and accumulating $100,000 or more on any day requires a deposit by the next business day. Late deposits carry penalties of 2 percent for deposits 1 to 5 days late and 5 percent for 6 to 15 days late (IRS Publication 15). Which schedule applies to you depends on your own history, so confirm it with the IRS or your payroll provider instead of assuming. Form 941 is filed quarterly, by April 30, July 31, October 31 and January 31. FUTA is reported on Form 940, due January 31 (February 10 if all FUTA tax was deposited when due), and Publication 15 says to deposit FUTA tax when the undeposited amount is over $500. The IRS says to keep employment tax records for at least four years.
The worksheet later in this guide debits the payroll taxes in the same week as the payroll. A small monthly depositor in practice pays them later, so the worksheet is a deliberately cautious view: it shows cash leaving earlier than it may have to. Do not read that as a reason to delay deposits. The penalties above are the cost of treating tax money as working capital.
Receivables: the balance customers owe you
Commercial customers pay on their own schedule. BSCAI's unit-economics article says corporate accounts payable departments often push payments into net-30 or even net-60 cycles, while a crew expects to be paid every two weeks regardless of whether the client has paid. Net 30 also does not mean 30 days from the first shift. An invoice goes out at the end of the service month, so a customer on net-30 terms may pay about 45 to 60 days after the work started. That is our reading of how terms and billing dates combine; the starting guide shows the arithmetic for a single account.
Over a 60-day cycle a company on biweekly payroll runs about 4.3 payrolls (60 ÷ 14) before the first invoice for new work comes back as cash. Each of those payrolls has to be funded by somebody. A BSCAI article on evaluating RFPs asks the same thing from the bidder's side, whether the payment terms are acceptable "regarding your commercial cleaning company's cash flow requirements," and warns of additional payroll expenses due before payment is received and the possible need for outside funding (BSCAI, December 11, 2024).
It helps to measure the total as a balance. Accounts receivable is the sum of what customers owe you. In the invented company it ended at $32,500 against monthly billings of $17,000, which is 1.91 months of billings ($32,500 ÷ ($51,000 ÷ 3)) tied up with customers. Track that figure monthly. When it rises faster than billings, customers are paying more slowly or you are collecting less diligently, and either way the bank balance will feel it before the profit statement does.
Reserves and the two-payroll rule
The unit-economics article recommends a dedicated cash reserve equal to at least two full payroll cycles. That is practitioner guidance from one franchisor executive, not a regulation or a tested norm, but it is a usable way to size a cushion, and the worksheet below adopts it as a planning input you can change.
For the invented company, two payroll cycles means two payroll weeks of cash out: 2 × $5,682.50 = $11,365.00. The same number falls out of a shortcut, 2 × $5,000 × (1 + 0.0765 + 0.06). Against that target, the company's closing balance is above the reserve in only four of the thirteen weeks (weeks 1, 5, 9 and 11). The bottom line ($6,870 closing cash) looks comfortable. The flags show a company one slow payer from trouble.
A brand-new company cannot build a two-payroll reserve before it has revenue, and we do not suggest it should wait for one. Treat the target as a direction: know the number, see how far away you are, and let it decide how quickly to take on a large account whose payment terms are long.
Contract profitability and concentration
Margins differ by account, and so does risk. The invented company's largest account, A, bills $4,200 of the $17,000 monthly total, or 24.7 percent. A and B together are $7,200, or 42.4 percent.
What losing A would cost depends on how much of its revenue was profit. Using the sample's direct-cost ratio (direct costs of $36,840 on billings of $51,000, 72.2 percent), A contributes about $4,200 × $14,160 ÷ $51,000 = $1,166.12 a month after its own labor and supplies. Profit after overhead and before owner pay averaged $11,370 ÷ 3 = $3,790 a month, so losing A, with its labor removable immediately, leaves about $2,623.88, a drop of about 31 percent. If labor cannot be scheduled away at once, the first month is worse. This is a stylized illustration for one made-up company, not a rule of thumb about how much concentration is too much.
Customer concentration is the same exposure as lead concentration, which we covered for advertising. A company with one big account and one source of leads has two single points of failure. Contract terms also matter: a service agreement with a clear payment clause and notice period shapes both the cash flow and what a lost account costs.
Growth consumes cash before it adds any
In cash terms, a new account is a loan from the owner to the customer.
The invented company's new account, G, bills $3,000 a month and pays after 45 days. Its crew costs $700 of gross wages per payroll. The cash cost of that labor alone, per payroll, is net pay of $700 × 0.8435 = $590.45, a tax deposit of $56.00 + $107.10 = $163.10 and workers' compensation of $42.00, or $795.55. Payrolls fall in weeks 2, 4, 6, 8 and 10 before G's first payment lands in week 11. Five payrolls at $795.55 is $3,977.75, more than G's monthly price, before a dollar of supplies or travel.
Break-even in accounts follows from the SBA's method. The SBA gives break-even in units as fixed costs divided by price minus variable costs per unit, and suggests adding about 10 percent for costs you cannot predict (SBA). The SBA also gives the version in sales dollars, fixed costs divided by the contribution margin, which is the share of each billed dollar left after direct costs, and we use that form. For the invented company, monthly fixed costs (insurance $210, rent $400, software $320 and an owner draw of $1,500, a choice that must be stated) are $2,430. After direct costs 27.765 percent of each billed dollar remains ($14,160 ÷ $51,000). Break-even billings are $2,430 ÷ 0.27765 = $8,752.12 a month, or $9,627.33 with the 10 percent cushion. At an average of $2,428.57 an account, that is about 3.6 accounts, or 4.0 with the cushion. Treating the owner's draw as a fixed cost is a decision, and it changes the answer: leave it out and the number falls.
The 13-week cash-flow worksheet
The rest of this guide is a tool. A 13-week forecast covers about a quarter, which is long enough to see payroll run against slow payers and short enough that you can fill it in honestly. Thirteen weeks is the Journal's own recommended horizon, an opinion and not a published standard, and the worksheet is the Journal's own design, not an industry template or a benchmark. It works in Excel or Google Sheets and uses only basic functions: SUM, SUMIFS, ROUND, ROUNDUP, IF, AND, MIN, INDEX and MATCH.
We computed the sample below with a script that follows the logic of the formulas as printed, and it reproduces the figures in this article: total collections $45,000, total cash out $44,130, closing cash $6,870, lowest closing cash $3,290 in week 8, ending receivables $32,500, and $1,647.50 for the late-payer test described further down. We have not opened the sheet in Excel or Google Sheets, so type the formulas into your own copy and confirm the same figures before trusting it with your numbers.
Sheet 1: Inputs
Every cell here is an assumption you replace. The sample values are the invented company's.
| Cell | Label | Sample | Note |
|---|---|---|---|
| B2 | Opening cash, bank balance at the start of week 1 | 6,000 | Use the real bank balance |
| B3 | Week 1 start date | any Monday | |
| B4 | Employer Social Security and Medicare rate | 7.65% | 6.2% + 1.45%, per IRS Publication 15; the wage base does not matter for hourly crews |
| B5 | Employee income-tax withholding | 8% | Assumption; depends on each Form W-4 |
| B6 | Workers' compensation, share of payroll | 6% | Assumption; set by state, class code and carrier |
| B7 | Unemployment tax, FUTA plus state, share of payroll | 2% | Assumption; ignoring wage-base caps overstates the cost |
| B8 | Reserve target in payroll cycles | 2 | Practitioner guidance; change it |
| B9 | Gross wages per payroll run | 5,000 | From timesheets |
| B10 | Months of billing covered by the window | 3 | 13 weeks is about 3 months |
Sheet 2: Invoices
One row per invoice you expect to be paid, including invoices already sent and unpaid when week 1 starts (their invoice week is 0 or negative). Columns A to D are typed. Columns E and F are formulas, filled down.
| Column | Header | Entry or formula (row 2 shown) |
|---|---|---|
| A | Account | Text |
| B | Invoice week (week 1 is the first forecast week; 0, −1 and so on are earlier) | Whole number |
| C | Amount | Currency |
| D | Expected days to pay | What really happens, not what the contract says |
| E | Expected payment week | =B2+ROUNDUP(D2/7,0) |
| F | Lands in the window? | =IF(AND(E2>=1,E2<=13),"yes","no") |
The sample has 33 invoice rows, one per account per month-end invoice:
| Account | Amount per invoice | Days to pay | Weeks to pay | Invoice weeks |
|---|---|---|---|---|
| A | $4,200 | 30 | 5 | −4, 0, 4, 9, 13 |
| B | $3,000 | 45 | 7 | −4, 0, 4, 9, 13 |
| C | $2,500 | 30 | 5 | −4, 0, 4, 9, 13 |
| D | $1,800 | 60 | 9 | −4, 0, 4, 9, 13 |
| E | $1,500 | 15 | 3 | −4, 0, 4, 9, 13 |
| F | $1,000 | 30 | 5 | −4, 0, 4, 9, 13 |
| G (new in week 1) | $3,000 | 45 | 7 | 4, 9, 13 |
Sheet 3: 13-Week
Weeks 1 to 13 run across columns C to O. Column A holds labels and column P holds totals. Type the formula shown in column C and copy it right to column O, with two exceptions marked below. Rows without a label in this table are blank spacers.
| Row | Label | Formula in column C |
|---|---|---|
| 3 | Week number | Type 1 to 13 |
| 4 | Week beginning | =Inputs!$B$3+7*(C3-1) |
| 6 | Opening cash | C6: =Inputs!B2. D6 to O6: =C29 (the previous week's closing cash) |
| 8 | Collections from invoices | =SUMIFS(Invoices!$C:$C,Invoices!$E:$E,C$3) |
| 9 | Other cash in (deposits, loan proceeds, owner injection) | Type |
| 10 | Total cash in | =C8+C9 |
| 12 | Payroll run this week (1 or 0) | Type |
| 13 | Gross wages this run (a memo line, not cash) | =C12*Inputs!$B$9 |
| 15 | Net pay to employees | =ROUND(C13*(1-Inputs!$B$4-Inputs!$B$5),2) |
| 16 | Payroll tax deposit (withholding plus both shares of FICA) | =ROUND(C13*(Inputs!$B$5+2*Inputs!$B$4),2) |
| 17 | Workers' compensation | =ROUND(C13*Inputs!$B$6,2) |
| 18 | Unemployment taxes | =IF(C$3=13,ROUND(SUM($C13:$O13)*Inputs!$B$7,2),0) |
| 19 | Supplies | Type |
| 20 | Vehicle, fuel, mileage | Type |
| 21 | Insurance premiums | Type |
| 22 | Software, phone, admin | Type |
| 23 | Rent, storage | Type |
| 24 | Loan and equipment payments | Type |
| 25 | Owner draw | Type |
| 26 | Total cash out | =SUM(C15:C25) |
| 28 | Net cash movement | =C10-C26 |
| 29 | Closing cash | =C6+C28 |
| 31 | Reserve target | =Inputs!$B$8*Inputs!$B$9*(1+Inputs!$B$4+Inputs!$B$6) |
| 32 | Headroom over reserve | =C29-C31 |
| 33 | Flag | =IF(C29<0,"SHORT",IF(C32<0,"Below reserve","OK")) |
Row 18 is a simplification: the sample pays the whole thirteen weeks' unemployment tax in week 13. Change the timing to match your own deposit calendar, and remember that FUTA applies only to the first $7,000 per employee, so for a large crew this row overstates the cost.
Column P totals each flow row with =SUM(C8:O8) and so on for rows 8, 9, 10, 15 to 26 and 28. Cell P34 is a check that must equal zero: =C6+P28-O29. If it does not, a formula was copied wrongly.
Below the grid, a block reads the receivables and the low point:
| Cell | Label | Formula |
|---|---|---|
| B36 | Opening receivables (invoices dated week 0 or earlier, unpaid at week 1) | =SUMIFS(Invoices!C:C,Invoices!B:B,"<=0",Invoices!E:E,">=1") |
| B37 | Billed in the window | =SUMIFS(Invoices!C:C,Invoices!B:B,">=1") |
| B38 | Collected in the window | =P8 |
| B39 | Ending receivables | =B36+B37-B38 |
| B40 | Months of billings tied up | =B39/(B37/Inputs!B10) |
| B42 | Lowest closing cash | =MIN(C29:O29) |
| B43 | Week of the lowest closing cash | =INDEX(C3:O3,MATCH(B42,C29:O29,0)) |
The receivables block is valid only if every unpaid invoice you hold is listed on the Invoices sheet.
The sample, filled in
The rest of the inputs are weekly. Payroll runs in weeks 2, 4, 6, 8, 10 and 12. Supplies are $95 and vehicle costs $70 every week. Insurance ($210) and rent ($400) are paid in weeks 1, 5 and 9. Software ($320) is paid in weeks 2, 6 and 10. The owner draws $1,500 in weeks 4, 8 and 13. Other cash in, loans and equipment are zero. With those entries, the worksheet produces:
| Week | Opening | Cash in | Cash out | Closing | Headroom vs. $11,365 reserve | Flag |
|---|---|---|---|---|---|---|
| 1 | 6,000.00 | 7,700.00 | 775.00 | 12,925.00 | 1,560.00 | OK |
| 2 | 12,925.00 | 0.00 | 6,167.50 | 6,757.50 | −4,607.50 | Below reserve |
| 3 | 6,757.50 | 4,500.00 | 165.00 | 11,092.50 | −272.50 | Below reserve |
| 4 | 11,092.50 | 0.00 | 7,347.50 | 3,745.00 | −7,620.00 | Below reserve |
| 5 | 3,745.00 | 9,500.00 | 775.00 | 12,470.00 | 1,105.00 | OK |
| 6 | 12,470.00 | 0.00 | 6,167.50 | 6,302.50 | −5,062.50 | Below reserve |
| 7 | 6,302.50 | 4,500.00 | 165.00 | 10,637.50 | −727.50 | Below reserve |
| 8 | 10,637.50 | 0.00 | 7,347.50 | 3,290.00 | −8,075.00 | Below reserve |
| 9 | 3,290.00 | 9,500.00 | 775.00 | 12,015.00 | 650.00 | OK |
| 10 | 12,015.00 | 0.00 | 6,167.50 | 5,847.50 | −5,517.50 | Below reserve |
| 11 | 5,847.50 | 6,000.00 | 165.00 | 11,682.50 | 317.50 | OK |
| 12 | 11,682.50 | 1,500.00 | 5,847.50 | 7,335.00 | −4,030.00 | Below reserve |
| 13 | 7,335.00 | 1,800.00 | 2,265.00 | 6,870.00 | −4,495.00 | Below reserve |
Totals: collections $45,000.00, cash out $44,130.00, net movement $870.00, closing cash $6,870.00, with the check cell P34 at zero. Opening receivables are $26,500, billings in the window $51,000, collections $45,000 and ending receivables $32,500, or 1.91 months of billings. The lowest closing cash is $3,290 in week 8.
How to read it
The flag row is the point. "SHORT" means payroll cannot be funded that week. "Below reserve" means the company is exposed to one slow payment, which in the sample is most weeks. The pattern comes from the sample's invoice dates: cash arrives in bunches (weeks 1, 5 and 9 carry the large accounts), while payroll falls every other week, so the balance saws up and down and the low points land on the payroll weeks that follow the long gaps between collections.
Stress test one customer
The worksheet earns its keep when you change one input and watch the floor. In the Invoices sheet, change account A's expected days to pay from 30 to 51, which lengthens its delay from 5 weeks to 8. Nothing else changes: same customers, same work, same profit. The lowest closing cash falls from $3,290 in week 8 to $1,647.50 in week 10. The hand check is simple. A's $4,200 now arrives three weeks later each time, so at week 10 one payment that had landed in week 9 has not yet arrived, and $5,847.50 − $4,200.00 = $1,647.50. The floor is $1,642.50 lower because of three extra weeks on one customer. Closing cash in week 13 is still $6,870, because A's later invoices land inside the window anyway.
What the worksheet leaves out
It is a cash view and does not replace a profit-and-loss statement or a balance sheet. It ignores sales tax, estimated income tax, depreciation, and wages earned but unpaid at the end of the window. Its payroll tax timing is simplified, as explained earlier. It cannot tell you whether your prices are right, only whether your timing works. Following it does not guarantee you will avoid a shortfall; it makes a shortfall visible early enough to act.
A monthly review that takes an hour
A worksheet that is built once and abandoned does little. Once a month, in this order, ask the following.
| Step | Look at | The question |
|---|---|---|
| 1 | Bank balance against the worksheet | Did cash land where the forecast said? If not, which invoice moved? |
| 2 | Receivables by customer and age | Who is paying slower than their stated terms, and has anyone's actual days to pay changed? |
| 3 | Gross margin by account | Does each account still leave what you priced? BSCAI suggests comparing actual hours worked with budgeted hours every two weeks. |
| 4 | Concentration | What share of billings is the largest account, and the largest two? |
| 5 | Reserve | How many payroll cycles of cash are in a separate account, against the target? |
| 6 | The next 13 weeks | Roll the worksheet forward one month and read the flag row. |
Keep business and personal money in separate accounts. IRS Publication 583 says you should keep your business account separate from your personal checking account, and a forecast built on a mixed account will not reconcile.
Where help can come from
Some cash gaps should be fixed by terms and pricing, and some by money. On terms, a written service agreement is where payment timing is set, and the time to negotiate it is before the first shift.
When a company needs financing, the SBA's loan page lists three programs: 7(a) loans, delivered by SBA 7(a) lenders; 504 loans, available through community-based Certified Development Companies; and microloans of $50,000 or less, provided by intermediary lenders (SBA). The SBA guarantees loans that outside lenders make; it does not describe any of these as a cash-flow bridge, and terms and eligibility change, so read the current rules at sba.gov and ask a lender what applies to you before building a plan around one.
For the books themselves, the SBA notes that a bookkeeper can handle day-to-day tasks at a lower cost, while a CPA typically costs more and can offer more tailored service. A bookkeeper to keep the records clean and a CPA for tax filings and loan applications is a common split. Payroll tax questions in particular, including your deposit schedule and state unemployment obligations, belong with a CPA, your payroll provider, the IRS, or your state workforce agency.
What to do this week
Pull the last three months of bank activity and list every invoice still unpaid, with the date it was sent and the days each customer has actually taken to pay in the past. Write your own Inputs sheet, replacing the sample's assumptions with your payroll, your workers' compensation quote and your state's unemployment rate. Enter the invoices, fill in thirteen weeks of known costs, and read the lowest closing cash and the flag row. Then change your largest customer's days to pay by three weeks and read it again.
If the floor is lower than you expected, the choices are ordinary ones: shorten terms on new contracts, bill promptly and follow up the day an invoice becomes late, hold back a large new account until the reserve can carry it, or price in the carrying cost of long terms. The pricing guide and the free commercial cleaning bid calculator help with the last of those. Good Loux, which publishes this Journal and built the calculator, does not forecast cash, keep books or collect invoices; the calculator turns your inputs into a bid price and does not model cash flow.
Sources
We read these pages directly on November 5, 2026. Pages change, so check the originals. IRS Publication 15 is a long document and we read the sections cited here. BSCAI is a trade association, and the authors of its articles are practitioners; we cite them for practice, and we found no independent measurement of cleaning-industry margins or turnover to cite instead.
- IRS: Publication 15 (2026), Employer's Tax Guide for Social Security and Medicare rates and the wage base, deposit schedules, deposit penalties, Form 941 dates, FUTA deposits and employment tax record retention.
- IRS: Tax Topic 759, Form 940 and FUTA for the FUTA rate, wage base, credit and due date (page reviewed September 24, 2026).
- IRS: Depositing and reporting employment taxes for the two deposit schedules and electronic deposits (page reviewed June 29, 2026).
- IRS: Publication 583, Starting a Business and Keeping Records (revised December 2024) for cash and accrual methods and keeping a separate business account.
- SBA: Calculate your startup costs for the break-even formula and the 10 percent cushion.
- SBA: Manage your finances for cash versus accrual accounting and bookkeepers versus CPAs.
- SBA: Loans for the 7(a), 504 and microloan programs.
- BSCAI: Job Costing for Profitable Bids in Contract Cleaning Services (David Murphy, March 12, 2025), Commercial Cleaning Unit Economics (Adam Povlitz, July 7, 2026) and Do You Qualify for This Janitorial RFP? (Curtis McLemore, December 11, 2024).
The sample company, its accounts and its payment timing, the 13-week worksheet, and the judgments marked as ours are not research findings. Nobody was interviewed, and no figure here is an industry average or a prediction of your results. Employee withholding, workers' compensation and state unemployment rates in the examples are assumptions.


