How the estimate is built
The calculator prices a job from the bottom up. It turns square footage into labor hours, adds up what each visit costs you directly, then sets the price so that overhead and profit are each the share of the price you choose.
Labor cost = hours × hourly pay × (1 + labor burden)
Direct cost per visit = labor + supplies + travel + other direct costs + (equipment per month ÷ visits per month)
Price per visit = direct cost ÷ (1 − overhead % − profit margin %)
Visits per month = visits per year ÷ 12, so five visits a week is 21.67 a month, not 20
Overhead and profit are percentages of the price, so they are counted once. The margin reported is operating margin: what is left of the price after direct costs and overhead. It is not markup. Adding 30% to your costs gives a margin of about 23%, and a true 30% margin needs a price of cost ÷ 0.70. The results panel shows both so you can see the gap. The monthly price is rounded up to a whole dollar and every other figure is computed from that rounded price.
Where the starting numbers come from
None of the square feet per hour figures here is an industry benchmark. The recognized production-rate tables (ISSA, BSC) are paid or member-only and we could not use them. What we could find are figures that software vendors and trade writers publish, and one worked example from the BSCAI. Offices and medical offices have figures like that, so their ranges are labeled vendor-reported. We found nothing published for the other five building types, so their ranges are illustrative: our own starting values, chosen so the calculator has something sensible to start from. In every case the “typical” starting value is the midpoint we picked, not a published average. Replace it with what your own crews do.
| Building | Starting range (sq ft per hour) | What backs it |
|---|---|---|
| Office | 2,500 to 4,000 | Vendor-reported: published by software vendors and trade writers, not an industry benchmark |
| Medical or dental office | 1,500 to 2,500 | Vendor-reported: published by software vendors and trade writers, not an industry benchmark |
| School or daycare | 2,000 to 4,000 | Illustrative: no published figure found; our own starting value |
| Retail store | 3,000 to 5,000 | Illustrative: no published figure found; our own starting value |
| Restaurant or café | 1,000 to 2,500 | Illustrative: no published figure found; our own starting value |
| Gym or fitness studio | 1,500 to 3,500 | Illustrative: no published figure found; our own starting value |
| Warehouse or light industrial | 4,000 to 10,000 | Illustrative: no published figure found; our own starting value |
The same goes for the other defaults. Labor burden (payroll taxes, workers’ compensation and similar costs) is commonly put at 25% to 40% of wages in vendor guides, so the calculator starts at 30%. Supplies, equipment, travel and overhead start at round numbers that are illustrative only. Whatever the starting numbers, a walkthrough of the building is what turns this estimate into a quote. The calculator refuses to show a price when an input is missing or impossible, for example overhead and margin that add up to 90% or more of the price.
Questions people ask when pricing a cleaning contract
How much should I charge per square foot for commercial cleaning?
Guides from software vendors cite roughly $0.05 to $0.20 a square foot for standard offices and more for medical offices and restaurants, but a per-foot rate hides the things that actually set the price: labor hours, visit frequency and your costs. Pricing from hours, as this calculator does, is more reliable. Use the price-per-square-foot figure it shows only as a sanity check against your other bids.
How many square feet can one cleaner clean in an hour?
Software vendors and trade writers report whole-building figures of roughly 2,500 to 4,000 square feet per hour for offices and 1,500 to 2,500 for medical offices. These are vendor-reported, not an industry benchmark, and we found no published figure for other building types. The real number moves with floor types, furniture, the number of restrooms and the task list. Time a crew on a similar building and use your own number.
How do I calculate labor hours for a bid?
Divide the cleanable square footage by how many square feet one cleaner covers in an hour. That gives labor hours per visit. Then add time for anything the area figure does not capture, such as heavy restroom counts or extra tasks. If you have a walkthrough or past jobs to go on, enter the hours directly.
What is the difference between markup and margin?
Margin is profit as a share of the price. Markup is profit as a share of cost. A 30% markup is only a 23% margin, and a 30% margin needs a price of cost divided by 0.70. Mixing the two up is one of the easiest ways to underprice a contract. This calculator works in margin on the price.
What profit margin should a cleaning company target?
Vendor guides commonly suggest somewhere between 10% and 30%, with 15% to 25% net often quoted. One secondhand figure for the industry average net margin is far lower, around 6%, so treat any target as something to test against your own books rather than a benchmark. The calculator reports operating margin after overhead and shows gross margin separately.
What is labor burden and why add it to wages?
An hourly wage understates what a cleaner costs. Employer payroll taxes, workers' compensation, unemployment and insurance add to it. Vendor guides commonly put the total at about 1.25 to 1.4 times the wage, which is why the calculator starts labor burden at 30% of wages. Use the figure from your own payroll.
Does cleaning frequency change the price?
Yes. More visits a week means a larger monthly contract, and each visit can take somewhat less time because there is less buildup. Less frequent service tends to cost more per visit. To turn a weekly schedule into a monthly one, multiply by 52 and divide by 12: five visits a week is about 21.67 visits a month, not 20.
Should I bid hourly, per square foot, or a flat monthly price?
Flat monthly prices are common for recurring contracts, with the per-visit and per-hour numbers kept in your own notes to check the bid. Per-square-foot pricing is used on large, standardized sites, and hourly pricing suits small or unusual jobs. Whichever you quote, build it from your costs first.
How do I know my bid is not too low?
Track actual labor hours against the hours you estimated for the first few months. If crews keep running over, the production rate you used was too high or the scope grew. The calculator also shows revenue per labor hour, which should sit comfortably above the loaded cost of an hour of labor.
Keep reading
- Why cleaning companies shouldn’t rely on ads alone
- How to find the person who hires cleaning companies
- Commercial cleaning prospecting templates you can actually use
Sources
- ISSA: how to calculate cleaning times
- BSCAI: commercial cleaning production rates, a key to successful bidding and estimating
- Cleaning & Maintenance Management: commercial cleaning bidding 101
- Clear Facility Services: janitorial production rates and cleaning hours
- CleanQuote: janitorial production rate calculator
- Swept: commercial cleaning job costing guide
- Jobber: how to price commercial cleaning jobs
A price is only useful if someone is asked to approve it. Good Loux is software that helps cleaning companies find businesses that may need them, see the evidence and contacts behind each one, and keep outreach and follow-up in one place. You can watch a short demo without signing up.